0.6/1kV Cu/XLPE/PVC Non Armoured Power Cable IEC 60502-1
0.6/1kV Cu/XLPE/PVC Non Armoured Power Cable IEC 60502-1
Non-armoured XLPE power cable, copper conductor, 0.6/1kV, for cable tray, conduit and fixed building wiring.
This non-armoured XLPE power cable is manufactured to IEC 60502-1 standard.
Conductor: copper class 2 stranded conductor
Insulation: XLPE, 90°C
Outer sheath: PVC
Rated voltage: 0.6/1kV
Application: fixed installation indoors, on cable trays, in ducts, not for direct burial without extra mechanical protection.
Single core and multi-core options available. Custom marking and packaging are supported.
We can provide pulling tension calculation upon request for duct laying projects.
FAQ
Q: Where to use non-armoured power cable?
A: It is suitable for cable tray, conduit and indoor fixed wiring. Not for direct burial without mechanical protection.
Q: What is the difference between armoured and non-armoured cable?
A: Non-armoured cable has no steel armour, lighter and lower cost. It needs protection if exposed to mechanical damage.
Q: Can you offer pulling tension calculation?
A: Yes, we can calculate maximum pulling tension and sidewall pressure for your duct installation.
CTA
Contact us for quotation and technical datasheet.
| Item | Specification |
|---|---|
| Product Name | 0.6/1kV Cu/XLPE/PVC Non Armoured Power Cable |
| Standard | IEC 60502-1, IEC 60228 |
| Conductor | Class 2 stranded copper conductor |
| Insulation | XLPE, max continuous temp 90℃ |
| Sheath | PVC |
| Rated Voltage | 0.6/1kV |
| Core options | 1C,2C,3C,4C,5C,3+1,3+2,4+1 |
| Cross section | 1.5mm² ~ 630mm² |
| Min bending radius | ≥15 × overall cable diameter |
| Installation temperature | ≥0℃ |
| Feature | Non-armoured, no steel armour, lightweight |
| Application | Indoor, cable tray, duct / conduit fixed wiring, NOT for direct burial without mechanical protection |