YJLV YJLV22 YJLV32 YJLV42 Aluminum Core XLPE Power Cable

YJLV YJLV22 YJLV32 YJLV42 Aluminum Core XLPE Power Cable - Image 2

YJLV YJLV22 YJLV32 YJLV42 Aluminum Core XLPE Power Cable - Image 3

YJLV YJLV22 YJLV32 YJLV42 Aluminum Core XLPE Power Cable - Image 4

YJLV YJLV22 YJLV32 YJLV42 Aluminum Core XLPE Power Cable - Image 5

YJLV YJLV22 YJLV32 YJLV42 Aluminum Core XLPE Power Cable - Image 6

Aluminum core cross-linked polyethylene insulated power cable, suitable for indoor and outdoor, buried, high drop and other occasions, can withstand mechanical external forces and tensile forces

Aluminum core XLPE insulated cables take aluminum as conductor and cross-linked polyethylene as insulation. They suit power grids from 0.6/1kV to 26/35kV.

These cables own stable insulation, heat resistance and solid mechanical strength. Aluminum weighs far less than copper and cuts project costs. It brings obvious economic benefits for large construction works.

The aluminum conductor runs steadily under long-term 90℃ working temperature. Its short-circuit peak temperature within 5 seconds can reach 250℃ safely.

We supply multiple armor types for different construction conditions. YJLV22 with steel tape armor fits underground laying. It bears outside pressure but cannot stand strong pulling force.

YJLV32 and YJLV42 adopt steel wire armor. They work well in high-drop zones. They resist both external impact and large tensile loads at the same time.

Custom special series are available on buyers’ demands. We make flame retardant, waterproof, low-smoke halogen-free variants for special engineering environments.

The cables are widely adopted for urban grids, factories, substations, tunnels and cable trenches. Reliable performance, flexible styles and low costs make them top picks for medium and low voltage power transmission.

Product Advantages

Light aluminum conductor reduces transport weight and cuts overall project investment greatly.
XLPE insulation holds stable performance under high temperature and short-circuit conditions.
Multiple armor structures match underground, overhead and steep terrain laying demands.
Optional flame retardant, waterproof and low smoke types meet special fire & environmental standards.
Balanced cost and quality lower maintenance frequency for long-term power operation.

Application Scenarios

Urban municipal distribution networks, industrial factory power circuits, substation connecting lines, indoor cable tunnels, ground cable trenches and ordinary buried engineering projects.

Quality & Service Support

All cables pass full electrical and mechanical inspections before delivery. We customize conductor cross-section, cable length and special functional layers. As direct cable manufacturer, we offer competitive bulk prices for global engineering buyers. Visit our official website: https://yidongjiaolian.com to view full specs and send inquiries.

Model	YJLV, YJLV22, YJLV23, YJLV32, YJLV33, YJLV42, YJLV43 (aluminum core)
Derivative models	ZR-YJLV (flame retardant A/B/C class), FS-YJLV (waterproof), WD-YJLV (low smoke halogen-free) Core count: 1 core, 2 cores, 3 cores, 4 cores, 5 cores
Rated voltage	0.6/1 kV、1.8/3kV、3.6/6kV、6/10kV、8.7/10kV、8.7/15kV、12/20kV、18/30kV、21/35kV、26/35kV
Conductor material	aluminum core
Insulation material	cross-linked polyethylene (XLPE)
Sheath material	PVC (YJLV/YJLV22/YJLV32/YJLV42), PE (YJLY/YJLV23/YJLV33/YJLV43)
Armor types	unarmored, steel belt armor (22/23 type), thin steel wire armor (32/33 type), thick steel wire armor (42/43 type)
Conductor operating temperature	normal 90 ℃, short circuit (≤ 5s) ≤ 250 ℃; Laying temperature: not less than 0 ℃ (recommended), not less than -20 ℃ (acceptable)
Minimum bending radius	Single core unarmored ≥ 20D, multi-core unarmored ≥ 15D, armored type ≥ 12D
Applicable standards	GB/T 12706, IEC 60502
Applicable scenarios	indoor and outdoor laying, buried, tunnels, cable trenches, and high drop areas

Core x Size (mm²)	Conductor Type	Insul. Type	Armored Layer	Approx.Weight (kg/km)	Standard
4×50	Stranded Al	XLPE	N/A	1,250	IEC 60502
4×95	Stranded Al	XLPE	N/A	2,100	IEC 60502
4×120(STA)	Stranded Al	XLPE	Steel Tape	3,450	IEC 60502
4×240(STA)	Stranded Al	XLPE	Steel Tape	5,800	IEC 60502

Core×Size(mm²) Conductor Type Insul.Type

4×50	Stranded	Al	XLPE
4×95	Stranded	Al	XLPE
4×120(STA)	Stranded	Al	XLPE
4×240(STA)	Stranded	Al	XLPE

rmored Layer

Approx.Weight(kg/km)

Standard

N/A	1,250	EC60502-1
N/A	2,100	IEC60502-1
Steel Tape	3,450	IEC60502-1

Steel Tape

5,800

IEC60502-1